ईंट की Compressive Strength कितनी होनी चाहिए? | IS 1077 Standards
First class: 10 N/mm², second class: 7.5 N/mm², third class: 3.5 N/mm²। IS 1077 specifications और testing method।
ईंट की Compressive Strength — IS 1077 Standards
Compressive strength ईंट की सबसे important property है — यह बताती है कि ईंट कितना load सह सकती है। IS 1077 Indian Standard specification define करता है।
IS 1077 Compressive Strength Requirements
| Brick Class | Minimum Compressive Strength | Chaudhary Bricks |
|---|---|---|
| First Class (Awwal) | 10.0 N/mm² (≈ 100 kg/cm²) | 10-15 N/mm² ✅ |
| Second Class (Doyum) | 7.5 N/mm² (≈ 75 kg/cm²) | 7.5-10 N/mm² ✅ |
| Third Class (Peera) | 3.5 N/mm² (≈ 35 kg/cm²) | 4-6 N/mm² ✅ |
| Over-burnt (Talsa) | No standard (very hard) | 15+ N/mm² |
Compressive Strength पर क्या असर करता है?
1. Raw Material (मिट्टी) - Good clay with proper silica-alumina ratio = strong bricks - Too much sand = brittle। Too much clay = cracking during drying
2. Firing Temperature (तापमान) - Under-fired (< 700°C): Weak, pale colour - Properly fired (800-1100°C): Strong, deep red - Over-fired (> 1100°C): Very hard but brittle, dark/black colour
3. Kiln Technology - Zig-Zag kiln: Uniform firing → consistent strength - Traditional: Uneven firing → 30-40% bricks weak
4. Moulding - Hand-moulded: More air pockets, lower strength - Machine-pressed: Dense, higher strength
How to Test — Compressive Strength Test (IS 3495 Part 1)
Equipment: Compression Testing Machine (CTM)
Procedure: 1. Take 5 random bricks from the lot 2. Fill frog (depression) with 1:1 cement mortar 3. Cure for 24 hours under damp cloth 4. Immerse in water for 24 hours 5. Remove, wipe surface moisture 6. Place brick flat between CTM plates 7. Apply load gradually at uniform rate 8. Note maximum load at failure
Formula: Compressive Strength = Maximum Load (N) / Loaded Area (mm²)
Example: - Brick area = 228 × 114 = 25,992 mm² - Maximum load at failure = 260,000 N (260 kN) - Strength = 260,000 / 25,992 = **10.0 N/mm²** → First Class ✅
Why Does It Matter?
| Application | Minimum Required |
|---|---|
| Load-bearing walls (2+ floors) | 10 N/mm² (First class) |
| Single storey walls | 7.5 N/mm² (Second class) |
| Partition walls | 3.5 N/mm² (Third class) |
| Foundation below ground | 10+ N/mm² (First class/Talsa) |
| Boundary walls | 3.5 N/mm² (Third class ok) |
Chaudhary Bricks — Consistent Strength
Zig-Zag kiln technology ensures 800-1100°C uniform firing temperature — resulting in consistent compressive strength across the entire batch। हर ईंट reliable — no guessing game।
FAQ — अक्सर पूछे जाने वाले सवाल
ईंट की compressive strength कितनी होनी चाहिए?
IS 1077 के अनुसार: First class ≥ 10 N/mm², Second class ≥ 7.5 N/mm², Third class ≥ 3.5 N/mm²। Load-bearing walls में minimum 10 N/mm² (first class) use करें।
Compressive strength test कैसे करते हैं?
Compression Testing Machine (CTM) से — brick को flat रखें, gradually load apply करें, failure point note करें। IS 3495 Part 1 method। 5 bricks test करें, average लें।
Under-burnt और over-burnt brick की strength कितनी होती है?
Under-burnt (pale/yellow): 2-3 N/mm² — बहुत weak, use न करें। Properly burnt (deep red): 7.5-15 N/mm²। Over-burnt (dark/black): 15+ N/mm² — very hard, good for foundation but brittle।
क्या higher compressive strength हमेशा बेहतर है?
Generally yes, लेकिन over-burnt bricks (15+ N/mm²) brittle होती हैं और standard size नहीं maintain करतीं। Foundation में over-burnt ok, walls में properly burnt (10-12 N/mm²) ideal।
ईंट चाहिए? Chaudhary Bricks — Since 1967
और पढ़ें — More Articles
ईंट vs AAC Block — घर बनाने के लिए कौन सा बेहतर? | Brick vs Block Comparison
Red clay brick और AAC block में से कौन सा आपके घर के लिए सही है? Strength, cost, insulation, और durability की पूरी comparison।
1 गज में कितनी ईंट लगती है? | Bricks Per Square Yard Calculator
जानिए 1 गज, 1 वर्ग फुट, और 1 वर्ग मीटर में कितनी ईंट लगती हैं। Free calculator included।
असली ईंट की पहचान कैसे करें? | How to Check Brick Quality
Ring test, water absorption test, और visual inspection — 5 आसान तरीके ईंट की quality जांचने के।
First Class और Second Class ईंट में क्या फर्क है? | अव्वल vs दू यम
Strength, price, और usage — दोनों grades के बीच पूरा comparison जानें।
2026 में ईंट का रेट कितना है? | Complete Brick Rate Guide India
UP, Haryana, Delhi NCR में ईंट का ताज़ा भाव। City-wise rates और factors jo भाव को affect करते हैं।
1000 ईंट की कीमत कितनी है? | 1000 Bricks Price 2026 India
1000 ईंट का रेट 2026 — First class, second class, third class सभी grades की कीमत। City-wise rates और calculation।
घर बनाने के लिए कौन सी ईंट अच्छी होती है? | Best Brick for House Construction 2026
घर बनाने में कौन सी ईंट use करें? First class vs second class, red brick vs fly ash — पूरी guide हिंदी में।
ईंट का वजन और साइज कितना होता है? | Brick Weight & Size India Standard
Standard brick dimensions India — 9×4.5×3 inch। ईंट का वजन 3-3.5 kg। IS 1077 specifications। Complete guide।
Fly Ash Brick vs Red Brick — कौन सी ईंट बेहतर? | Complete Comparison 2026
Fly ash brick और red clay brick में अंतर — strength, cost, durability, eco-friendliness। कौन सी ईंट किस काम के लिए?
भारत में ईंट भट्टे के प्रकार | Types of Brick Kilns in India — FCBTK, Zig-Zag, Hoffman
FCBTK, Zig-Zag, और Hoffman kilns — कौन सा भट्टा बेहतर quality देता है? Pollution norms और CPCB guidelines।
2026 में घर बनाने का खर्चा कितना है? | House Construction Cost India
1000 sq ft, 1500 sq ft, 2000 sq ft — हर साइज़ के घर का construction cost breakdown। Materials, labour, और tips।
ईंट की चिनाई में सीमेंट-रेत का अनुपात | Cement Sand Ratio for Brickwork
1:4, 1:5, 1:6 — कब कौन सा ratio use करें? Mortar mix guide for 4.5 inch और 9 inch walls।
ईंट का Water Absorption Test कैसे करें? | IS 3495 Method
IS 3495 के अनुसार ईंट का water absorption test — step by step guide। Good brick: 20% से कम absorption।
Zig-Zag Kiln Technology — भारत का सबसे efficient भट्टा | CPCB Approved
Zig-Zag technology क्या है? CPCB norms, 40% कम pollution, बेहतर quality — Chaudhary Bricks का modern approach।
दीवार में कितनी ईंट लगेगी? | Brick Calculation Formula for Wall Construction
Length × Height ÷ brick area — simple formula। 4.5 inch wall, 9 inch wall, और 13.5 inch wall के लिए calculation।
सबसे सस्ता घर कैसे बनाएं? | Low Cost House Construction Tips India 2026
Budget construction tips — सही ईंट का चुनाव, second class brick कहाँ use करें, material saving ideas।
ईंट को पानी में कितनी देर भिगोना चाहिए? | Brick Soaking Before Construction
ईंट भिगोने का सही तरीका — 24 घंटे या 2 घंटे? Water absorption और bond strength पर effect।